Engine_only Boats - 26 found

Engine is from 1954 and was originally of 256 cu in displacement, in 2004 completely machine shop rebuild, cylinders bored 80 over, new pistons, new bearings, balanced, upgraded reground 292 crankshaft, actual displacement is 295 cu in, upgraded the intake manifold to a aluminum 'Blue Thunder' 4-barrel ready intake, but the original intake with the 2 side draft carters is also with it. Complete with Marine exhaust manifolds and raw water cooling timing cover. Engine was originally used in a Buehler/Dowty Turbocraft Jet boat. Used for 8 years in wooden hull 1954 jet boat until it was laid up with oiled cylinders as a spare engine. Very good compression, low hours.

The boat had been stored in a barn for about 40 yrs. by the owner I bought it from, who had purchased it from the original owner. this is a pattern boat that will need a full restoration. I don't think that I will be able to get to it since I have several other boat that I need to restore. Hence, I have decided to put it on the market. This will be a great boat once it is completed.

This engine came out of a 24' sailboat, built 1958 in Roskilde, Denmark. the engine was built in Coventry England. It comes with transmission box, lot's of spare parts and original documents.

You are looking at a Brennan Gold Cup Racing Motor from 1927. The engine is 250 HP and was built in Syracuse, New York. Brennan excelled in engines beginning in the early 1900's. This engine likely would have been used in a Gold Cup Racer at the time and would be ideal in a period correct boat. This engine has been run and is believed to be in good mechanical condition.

This is a Hall Scott model 175 marine engine, built in the 1930's. Complete on a stand and running. Dual ignition mag and distributor. 2 spark plugs per cylinder. Mountings indicated that it may have had a marine application.

1931 Scripps model 124. 3000 rpm 125HP 6 cylinder. Purchased 30 years ago for a Hacker Craft, but never used or rebuilt. Previous owner went through bottom end - no records or other info for that work. Needs complete rebuild. Rare Scripps similar to F6 model.

Motor is complete less carb. Also it is seized from setting and water getting in through the carbs. Have new head gaskets and original parts manual.engine is on stand.

This engine was originally in a 19' Foot twin cockpit Gar Wood hull #4272. The engine is incomplete and was purchased in the 50's. It is a total basket case and comes with the original gear box.

This engine is the last surviving motor from the Wilson family of Ingersoll, Ontario and the Muskoka Lakes region. The Wilsons campaigned Miss Canada racing boats very successfully in the 1930s and 40s. This twin cam Racing engine was built and tested by renowned racing mechanic Charles Volker in 1935, but was outlawed by a Canadian Boating Federation (CBF) rule change before it could be campaigned in Little Miss Canada VI. It is therefore in remarkable original condition. This one-of-a-kind piece of Canadian racing history would make a wonderful addition to a private collector's display.

Offered for sale is a Sterling Petrol engine. This engine is a L-6 offering 678 cu. in and 225 HP. Purchased over 10 years ago the engine has been awaiting the perfect boat to be put back into for use once again. The owner of this engine never ended up finding this project and is now ready to sell the engine. The next owner no doubt will deploy this into a fabulous boat and allow this great engine to once again come back to life. Pictures available in a few days

The engine came out of a 1947 Hunter. It comes complete with transmission. Condition of engine is unknown, however I was told it was in running condition when removed.

Here is a Hall-Scott Invader 168, the most significant and best known model produced between 1931 and 1941 when Hudson took over war time production under license. Ready to be rebuilt for your project!

A very rare 5 HP Lozier Engine with all of the markings and name plate confirming as such. A great piece for your launch or collection.

A very rare Lozier engine last run in 2000 and stored away properly. Great piece for any collection.

Completely original and a true collector's piece! This 7.5hp Scott Attwater is complete with its original carrying bag - great display piece or addition to your 1950's outboard boat.

I have a Pre-War 60 Horse Power Scripps Motor with Original Transmission. Motor is seized. This is a restoration candidate that would complete a restorer's interesting project. Comes complete with the original transmission. This motor has the SCRIPPS red metal tag on the head and the brass tag on the Transmission. Seller will remove engine from boat and strap to pallet for the buyer.

Chrysler Model EM 6 cylinder 100 HP removed from a 1927 Chris Craft Cadet hull # 1211. Spins freely, needs manifold, otherwise complete.

A Scripps 302 engine built in 1929 and offered as complete and in running condition. The engine offers 316HP with 894 cu. in.

This is a Scripps 302 engine circa 1937 which is complete and offered with 897 cu.in in size and 316HP. The engine is complete and perfect for your next project.

They don't get any rarer than this, a four cylinder marine engine made by the Dodge Bros. It is not known what boat this came out of but this is the same block that Dodge used in their 1926 cars and was adapted for marine use. The engine is intact but does not turn over. A truly unique engine that should be is someones collection.

I have a 1969 265hp Marine International Palmer motor that came out of a sea boat. I also have the transmission and lots of other parts for it. I'm willing to part it out or sell everything together. It ran when it was taken out of the boat a few years ago but will need new piston rings and some of the pistons re-honed. Palmer originally bought the 392 motors from International and modified them to be marine motors which is why it is both Palmer and International. The model number is M392 Port and the serial number is 47446-9.

I am located in Warren, Maine and am looking for a Lozier marine engine (or boat) wanted dead or alive, to power a rebuilt launch. possible trade: 1904 Lockwood-Ash 4HP working condition. Made in Jackson, Michigan

This is a free turning by pull cord or starter motor for parts or rebuild. Shift/speed control Station with 6 ft cables. Motor has no wiring harness.Cowl has been brush painted, but is sound. Motor foot seems to be O K , and responds to shifting positions. Local pick-up in Pensacola, FL; or will deliver within 400 miles at $.50 per mile, or crate and ship to buyer for actual agreed cost. The motor on the boat is what this one can look like when properly restored.

Palmer Brothers S-1, 1914, inboard, single cylinder, 2 cycle, gasoline marine engine. In excellent condition. No missing parts, cracks or welds. Never restored, fresh water cooled with eccentric driven water pump. Superb bronze "make and break" low tension ignition. Has good compression, runs. This is one of only a very few Palmer S-1 in our galaxy. Might consider a "code" steam boiler as possible partial trade.

Motor looks to be in excellent condition.Come complete with driveshaft and prop. Has the orginal parts except the generator which has been renewed. 6 cylinder, dual ignition.

1961 Crew Model 1302 6 cylinder Engine.